Month: August 2024

  Standard 1:10 onroad tire rims are a bit too small for the offroad counterparts so you must file away some of the plastic on the rim first.

Car going too fast in this type of track can break easily!  

Damage around screw holes seems a common issue on Tamiya cars. It could have occurred due to a combination of factors. Screw holes create points of stress concentration in the chassis. When a screw is tightened, the material around the hole experiences higher stress than other areas of the chassis. In fact, sharp edges and […]

Sometimes when you break the rear C hub, you can use alternatives that are not 100% “compatible”. Refer to the photos below, the DT02 right rear C hub is a metal one originally designed for another model. It is smaller, uses smaller bearings, and has a narrower lower mount point. If you happen to have […]