Verulamium Park in St Albans is a great spot for running RC cars due to its diverse terrain, open spaces, and accessibility. The park offers large grassy fields, which provide a forgiving surface for bashing and high-speed runs. These areas are perfect for off-road RC vehicles, allowing for jumps, drifts, and general rough-terrain driving without […]
Month: March 2025
Doing RC car jumps
Jumping an RC car properly requires a combination of throttle control, steering input, and smooth landings to maintain stability and prevent crashes. As you approach the jump, it’s important to build up speed gradually rather than going full throttle right away. The ideal speed depends on the height and distance of the jump, and lining […]
Foam tire Vs rubber tire, which one lasts longer?
Results show that foam tires do last at least 2 times longer when the outdoor temperature is around 15 degrees Celsius or less… Grip is not as good though…
Fixing broken Glider body
Hot glue has kind of become the go-to fix for broken foam gliders, and it’s not hard to see why. Foam planes crash—it’s part of the hobby—and you need a glue that’s quick, forgiving, and strong without melting the foam. Hot glue checks all those boxes. The biggest advantage is speed. You don’t have to […]
Tamiya TL01 motor pinion options
The TL-01 is well-regarded for its balance between affordability and performance. It was widely used for both casual street racing and light off-road driving. While it has since been succeeded by newer models like the TT-02, the TL-01 remains a classic among RC enthusiasts. The TL01 by default allows you to use 19T, 21T or […]
Large Glider to RC conversion (differential thrust)
Differential thrust is one of the simplest and most effective ways to bring a static hand-throw foam glider to life as an RC model. The idea is straightforward: instead of adding a whole rudder, servo linkages, and complex control surfaces, you mount two small motors—usually on the wings or near the fuselage—and control the plane […]
Passenger plane style glider to RC conversion prepworks
For this handthrown glider to be converted to RC (differential thrust), first the wings must be leveled so that the motors and the props can be attached without scratching anything. Also the elevator needs a little bit of angle so the plane can ascend… Dual 8520 motors, 70mm prop, pusher configuration. Works flawlessly, except that […]
Spoiler for onroad RC car
At high speeds, air moving over the RC car can cause lift, making it harder to control. A well-designed spoiler pushes the rear of the car downward, increasing traction on the rear wheels. This helps in better cornering grip by preventing the rear end from sliding out (reducing oversteer); and improved acceleration by keeping the […]
Which handthrown foam glider is better for RC?
The picture shows a Lidl style glider VS a fighter jet glider. Both were modified from hand thrown to RC. So, which one is better for RC modification, assuming differential thrust will be used? My answer is the fighter jet. It is solid, easy to modify, and can fly even with just TWO 720 motors […]
2S lipo cannot take charge
A 7.4V 2S LiPo battery consists of two 3.7V cells connected in series. If one cell is unable to take charge and rapidly drops to zero voltage after charging, it is likely due to severe damage or internal failure. One of the most common reasons for this issue is an internal short circuit within […]










