If you ever find the need to 3d print spur gears for your Tamiya cars, Fusion 360 has a third party addon and the screen shot shown contains values worth your reference.
Month: May 2023
RCPRESS techtip: highest speed you can get with a stock silver can on a TT01
Instant improvement in speed by changing to a 55T spur and a larger pinion to match the spur – this is about the fastest you can get with a stock 540 motor. RC enthusiasts often experiment with different gear ratios, including using larger pinion gears, to optimize their cars for specific track conditions. In certain […]
DF01 and TA02 gear compatibility
The spur gear of TA02 and DF01 are compatible. The spur gear is part of the gear transmission system in an RC car. It meshes with the pinion gear, which is directly attached to the motor shaft. As the motor spins, the pinion gear engages with the spur gear, transferring rotational force to the rest […]
RCPRESS techtip: when should you stop pushing your silver can with 3S power?
When temperature is very low it is okay to run a stock silver can with 3S power. But summer time is coming…. We just fried a silver can on a Tamiya DT01 when outside is 16 degrees C. ..