3D printed arms may not be strong enough …
Seems like 3D printed parts (using PLA) may not always be strong enough for actual…
0 Comments
RC Tech Tip Video: Negative camber for TT01/02…
This 3D printed TT02 front upper arm is 2mm shorter than the stock one, so…
0 Comments
Camber and entry level cars
Entry level cars such as the TT02 do not allow you to adjust the upper…
0 Comments
Tires’ Temperature Rating
Onroad rubber tires have ratings based on temperature on the track. Smaller number indicates softer…
0 Comments
The importance of motor cooling
When you are using a BL motor stronger than 13.5T, always check and make sure…
0 Comments
Diff lock
Sometimes you may want to have no differential at the front. On a standard Tamiya…
0 Comments
Plastic gear diff
A typical gear differential: The drive gear is mounted on the carrier which supports the…
0 Comments
Plastic cups
Plastic cups can and will break! Avoid plastic cups whenever possible (and especially if it…
0 Comments
Brushed 540s…… why do they still matter?
You might think that with brushless motors dominating RC cars, boats, and planes, brushed 540…
0 Comments
Broken Ball Diff at the front…
Ball Diffs are usually pretty durable. However, the long thin screw that holds the 2…
0 Comments