Large Glider to RC conversion (differential thrust)
Differential thrust is one of the simplest and most effective ways to bring a static hand-throw foam glider to life…
Passenger plane style glider to RC conversion prepworks
For this handthrown glider to be converted to RC (differential thrust), first the wings must be leveled so that the…
Spoiler for onroad RC car
At high speeds, air moving over the RC car can cause lift, making it harder to control. A well-designed spoiler…
Which handthrown foam glider is better for RC?
The picture shows a Lidl style glider VS a fighter jet glider. Both were modified from hand thrown to RC.…
2S lipo cannot take charge
A 7.4V 2S LiPo battery consists of two 3.7V cells connected in series. If one cell is unable to…
BT01 modular gearbox
One very good thing about the BT01 gearbox module is that you can test fit the gears and make sure…
Tamiya TA02 pinion alignment
As you can see from the photo, the TA02 pinion positioning along the motor shaft is kinda guesswork. If it…
Tamiya BT01 front bumper
The BT01 front bumper has a large gap, and structurally this will give room for easy breakage. You may want to…
ESC Wire Oxidization – What It Is and Why It Matters
If you’ve been in the RC hobby for a while, you’ve probably seen it—wires on your ESC or motor that…
Optimal and max prop size for 720/820 coreless motors
The 720 motor is usually faster but has less torque than the 820. That means with a larger prop the…