This is a typical FPV camera and video sender running at 5.8Ghz.
The sender needs a small heatsink.
The entire circuit needs 4V or above power input. Not all RC car receiver can supply sufficient power to it. And you need a proper mount for the circuitry.
For camera mount please see this: https://upgradeparts.com/2022/02/28/front-fpv-cam-mount-for-tt02/
Try not use to autoscan on the goggle as it would likely not be able to find the exact frequency match.
Some said it is safe to use channel A and then band 1 (therefore making A1). You just need to make sure your goggles are locked onto the correct frequency.
Also refer to this table:
Total Views: 587 ,
Categories:
