RC quicktip: dog bone shaft kept falling off

>> RC Videos , Tech Tip - Arms, Hubs, Shaft...etc , Tech Tips >> RC quicktip: dog bone shaft kept falling off

If the dog bone shaft keeps falling off after landing a jump, a long term solution is to use CVD replacements. A cheaper quick fix is to shorten the upper linkage. By adjusting the upper linkage to make it shorter, the dog bone will less likely fall off.

Another trick is to use zip ties around the shafts.

An even more reliable solution is to use shorter dampers to limit the arm movement. When the arm’s downward movement is limited, the dog bone shaft will hardly fall off.

 

 

 

Total Views: 1588 ,

Related Post

Free Tech Tips – shaft drive and dirt

If you are going to do lots of off road racing on dirty tracks, go…

Extending the wingspan of a simple glider plane

In theory, the wings of an airplane help create lift, therefore the longer the wingspan…

RC techtip vid: choosing the right grassland for offroad racing

Grassland with thick grass can easily kill your motor and your ESC. Grassland with thin…