Manta Ray motor mounting
This is the back cover of the alloy mount: Note that there is a rather…
0 Comments
Outrunner motor
An outrunner motor is the most common type of brushless motor found in RC planes.…
0 Comments
Using silicone
Applying silicone spray onto bearings immediately after running on wet track can prevent rust. Bearings…
0 Comments
Is fan a must for BL setup?
Not really. If yours is a 17.5t or 21t, a fan for cooling is nice…
0 Comments
Tamiya Rx540sd motor performance
https://youtu.be/lV1KFAqZA2k?si=aNHtF04LAJhAkbQC In terms of performance it is almost like a modern day 23T. The motor…
0 Comments
The Voltage Question: Is It OK to Run 3S Lipo on a Stock Brushed Motor?
If you hang around the RC hobby long enough, you’ll eventually hear the old wives’…
0 Comments
Techtip: Tamiya Torque tuned brushed motor
Torque-tuned motors are designed to provide increased torque at lower RPMs (revolutions per minute). This…
0 Comments
RCPRESS techtip: when should you stop pushing your silver can with 3S power?
When temperature is very low it is okay to run a stock silver can with…
0 Comments
Pushing a silver can to the limit – 2 x 2S serial connection
See for yourself. Outdoor temp below 0 degree, running 2 X 2S serial connection, stock…
0 Comments