Free Tech Tips – motor turns
This is a term that describes the number of times the wires are wrapped around…
0 Comments
Free Tech Tips – using separate power source for the receiver
The receiver needs approximately 6V of power to operate. In a typical configuration, the ESC…
0 Comments
Free Tech Tips – battery voltage and its relationship with performance and reliability
We use 7.2V batteries here as examples for discussion. The 3700mah GP pack is so…
0 Comments
Free Tech Tips – tire sizing
According to Sean Holman in his article "Choosing The Right Ratio - Uncovering The Secret…
0 Comments
Free Tech Tips – touring to truggy conversion
Even though it is technically possible to convert a touring car to a truggy by…
0 Comments
Free Tech Tips – mixing and matching ESC, receiver and servo
To connect receiver and ESC/servo produced by different manufacturers, you may need to do some…
0 Comments
Review – XB Pro Buggy
The XB Pro packages have high standard in workmanship. All spinning parts are properly lubed,…
0 Comments
Free Tech Tips – soldering battery cells
Soldering directly to the battery cells is never a good idea. You should only solder…
0 Comments
Free Tech Tips – dog bone end float
If you change the stock suspension settings (damper, mounting point …etc) you may need to…
0 Comments
Free Tech Tips – changing gear ratios
Generally speaking you can change the gear ratio by changing the pinion and/or the spur…
0 Comments