Durability of 3d print spur gear
This photo shows a 3d printed spur gear (PLA) that has been used for at…
0 Comments
Significant weakness of the Manta Ray drive train
As can be seen from this photo, when the gear box cover cracks (which can…
0 Comments
Grease on spur gear
When should we use grease on the spur gear? When the gears are exposed, grease…
0 Comments
FF03 DIY locked front diff
FF03 DIY locked front diff https://www.youtube.com/shorts/gO0Wbo5ZeBs Locking the differential ensures that both wheels on the…
0 Comments
RC Techtip: Tamiya Frog rear dog bone shaft falling off
The Frog features universal drive shafts in the rear to enhance efficiency and reduce the…
0 Comments
Techtip: DF01 RWD easy modification
One easy way to change your DF01 to RWD is to remove the center shaft…
0 Comments
Techtip: TT02 gear ratio limit
There is a limitation to the gear ratio one can achieve on TT02. As you…
0 Comments
Techtip: settings for 3d print spur gears
If you ever find the need to 3d print spur gears for your Tamiya cars,…
0 Comments
RCPRESS techtip: highest speed you can get with a stock silver can on a TT01
Instant improvement in speed by changing to a 55T spur and a larger pinion to…
0 Comments
DF01 and TA02 gear compatibility
The spur gear of TA02 and DF01 are compatible. The spur gear is part of…
0 Comments