Free Tech Tips – dog bone end float
If you change the stock suspension settings (damper, mounting point …etc) you may need to…
0 Comments
Free Tech Tips – changing gear ratios
Generally speaking you can change the gear ratio by changing the pinion and/or the spur…
0 Comments
Free Tech Tips – more on gear ratios
Gear ratios are usually quoted in the format of “2.X to 1”. This is sometimes…
0 Comments
Free Tech Tips – motor capacitors
Upgrade motors usually come with capacitors for reducing the radio noise created by the motor…
0 Comments
Free Tech Tips – torque VS rpm
There are often tradeoffs between torque and rpm. Know what you need: torque or speed…
0 Comments
Free Tech Tips – lower turn motor
A lower turn motor such as a 15-T can produce greater RPM but slightly less…
0 Comments
Free Tech Tips – ball bearings
Ball bearings are the most common type of bearing and are often found in upgraded…
0 Comments
Free Tech Tips – slip
Slip is the result of a ball diff being too loose. Slipping can lead to…
0 Comments
Free Tech Tips – more on gear meshing
It takes time for brand new gears to mesh well. Therefore, don’t go full speed…
0 Comments
Free Tech Tips – gear meshing
Don’t mesh the motor pinion gear too close with the spur gear or the motor…
0 Comments