Category: Tech Tips

DIY RC boat, wooden structure with fiber glass

4S power, off the shelf prop unit: https://youtu.be/T7mTEOMj12A?si=Zg1pq6KuzBT659jf https://youtu.be/qSr1YU_deLM?si=tA3aN0IULc-2Znbq Fiberglass is a popular material for…

Tamiya spur gear pin issue

The pin that holds the spur in place may fall off, so a little bit…

380 class motor on 1:10 RC

https://youtu.be/uaoN23N8mpY A 380-class motor is physically smaller and lighter than a 540-class motor. For lightweight…

Low temp tires for RC in Winter

Low-temperature rubber tires are specifically designed for cold weather or low-temperature environments and are commonly…

RC boat with jet pump

The jet pump uses an impeller inside a housing to draw water in from the…

RCPRESS vid front air intake idea

Very creative front air intake. Ideal for cooling the electronics.

Front one way reversed

The front one way on this car is installed in reverse. Therefore when it runs…

Tamiya Wild One issues

  Make sure you apply locktite on the screws of the protective casing / body…

Battery plugs for RC planes

RC planes use various types of battery plugs to connect their batteries to the electronic…

Foam tire VS rubber tire

Foam tires and rubber tires for on-road RC cars differ significantly in their design, performance,…